SHK-1 Non-Vented
STUDSON SHK-1 Non-Vented Safety Helmet
The STUDSON SHK-1 Non-Vented Safety Helmet is designed to tackle the toughest tasks in high-risk environments. Built with the same innovative materials and advanced protection as its vented counterpart, this version is tailored for electricians, utility workers, and others in environments where electrical safety is paramount.
Key Features
Class E Helmet: Engineered to withstand up to 20,000 volts, making it the ideal choice for electrical and high-voltage applications.
Non-Vented Design: A fully sealed shell provides protection against electrical conductivity, ensuring maximum safety in high-risk environments.
All-Day Comfort: Thoughtfully designed with lightweight materials and a smooth interior for reduced pressure points.
Innovative Features
Koroyd® Welded Tubes: This advanced material absorbs maximum energy upon impact from direct and angled blows. Its crumple-on-impact technology is designed to reduce the risk of serious head injuries.
Twiceme® NFC Technology: An integrated NFC chip allows first responders to access your emergency contacts and critical medical information in seconds, saving valuable time when every second counts.
4-Point Chin Strap System: The Fidlock® magnetic buckle offers one-handed operation, even with gloves, while the nylon straps adjust easily for a secure and stable fit.
Accessory-Ready: Compatible with a range of add-ons, including headlamps, face shields, and ear protection mounts, to adapt to your specific job requirements.
Built to Fit
The SHK-1 Class E comes in two adjustable sizes to accommodate a wide range of head sizes:
- M/L (53–59 cm)
- L/XL (58–63 cm)
With the rear dial system and extendable front brow pad, you can quickly fine-tune the fit for maximum security and comfort.
Complies with the following standards
ANSI/ISEA Z89.1-2014 (R2019) Type I & Type II
EN 12492:2012 Clauses:
-
- Shock Energy Absorption Capacity: Front, lateral, and rear impacts (Clauses 4.2.1.2, 4.2.1.3, 4.2.1.4)
- Penetration Resistance: Clause 4.2.2
- Retention System Strength: Clause 4.2.3
- Retention System Effectiveness/Roll-Off: Clause 4.2.4
Built to Last:
- Weight: 495 g
- Manufacturer's Warranty: 3 years
- Field Use Lifespan: 3–5 years
- Shelf Life: Up to 10 years
Built for Electrical Safety
The SHK-1 Class E Non-Vented Safety Helmet isn’t just another hard hat...it’s a commitment to safety for professionals working in high-voltage environments. Designed to provide electrical protection, advanced impact resistance, and all-day comfort, this helmet is ready for whatever the job throws your way.
For more information, contact SUPPORT@STUDSON.COM.
ACCESSORY OPTIONS
Visor with under brim integration, ear protection easily clips into the side rails, rear brim molecularity and 4 headlamp clips.
CERTIFICATIONS
ANSI Z89.1 – 2014 TYPE I & II CLASS E
CONSTRUCTION
Integrated koroyd® panels protect the head in critical impacts zones, paired with an eps liner and abs shell for ultimate durability.
FIT SYSTEM
Sleek 360°fit system with 20mm of adjustability up or down ensures a secure fit and comfort for all head shapes and sizes.
LIFE SAVING DIFFERENCE
twICEme®nfc (near field communication) chip embedded in the helmet which stores and gives vital emergency information to first responders when seconds matter.
PRODUCT WEIGHT
495G
ROTATIONAL PADDING
Industry first silicone shearing pads allow for rotational energy absorption upon oblique impacts and finished with a silver antimicrobial fiber reducing bacteria.
SIZING
M/L (53-59CM), L/XL (58-63CM)
STRAP SYSTEM
Fidlock® magnetic buckle enclosure with adjustable nylon 4-point strap, allowing for maximum adjust ability and easy one-handed use with gloves.
VENTILATION SYSTEM
Designed to keep rain out of vents, paired with koroyd® welded tubular makeup, provides unrivaled breath ability and exhausting of hot air.
I wish I would have made the purchase of this helmet a while ago instead of hesitating! This thing is way more comfortable and cooler than anything I’ve worn in the past. Very happy with it so far. Great quality, fit and finish is to very high standards.
I got this hard hat for the site. I ended up getting safety yellow non vented because I wanted the most protection; falling debris and electrical safety concerns. It does get a bit hot without the vents but it's worth the protection. I picked STUDSON for the ability to have an all in one package because I don't want to throw on a gaiter and glasses and earplugs. It does it all, has some small issues here and there but does exactly what I need it to and well worth it. Plus the TwiceMe, there to help with info when you can't. Would do it again.
Hard hat is comfortable, utilizes a welding halo adapter great but the down fall is the adjustable liner that is not replaceable. I’ve had this a few months and the front adjustable part of liner broke on the adjustment tab.
Hey Don,
Thanks for leaving your thoughts. End user feedback like yours is always helpful for us to know. Since it sounds like you're experiencing issues with your fit system, please email warranty@studson.com with any relevant photos or video to best explain the problem. Looking forward to your response! - The STUDSON Team
Works great
I would love to write a review but my state of the art hard hat hasn’t arrived yet. Estimated time was today, which I’m ok with but Studson should really look into the estimated time of deliveries.
Hi Uriel,
I'm sorry to hear about your frustration regarding our shipping times. Upon reviewing your order, it appears it was placed on Friday at 4 pm and shipped out promptly on Monday morning. Due to the nature of Ground shipping, your package is scheduled to arrive on Thursday from our facility. Please note that our operational hours are Monday to Friday, 8 am to 5 pm PST.
We apologize for any inconvenience caused and regret that we couldn't deliver your order sooner.
Best regards,
Studson
